请选择 进入手机版 | 继续访问电脑版

Flybedream@ATC管制室

 找回密码
 立即注册
热搜: 改档 涂装
查看: 83|回复: 3

[求教] 改檔閃退 Crashed while testing my self-made stage

[复制链接]
发表于 2022-7-30 18:12:41 | 显示全部楼层 |阅读模式
求經驗分享及指教
我正嘗試做自己的改檔,但我接連遇到一個問題就是 當我把改檔弄好去測試它能不能順利運行時,每次到了最段的5-10分鐘或最後的三兩班機,它就會閃退﹗

有人有同樣的經驗嗎﹖是那裡出問題了﹖ 謝謝。

Seek Advice and Guidance
I'm trying to make my own stages for ATC4, however, I have encountered a problem multiple times and it was quite frustrating. When I play my self-made stage to ensure it runs smoothly, it always crashed during the last 5-10mins or few flights of the stage.

Does anyone experienced the same? Would you mind sharing some tips and guidance. Thanks in advance.




回复

使用道具 举报

发表于 2022-8-4 22:40:15 | 显示全部楼层
You can check whether there is a plane one second after the Dodge time. You can check whether there is a problem with the setting of that plane
回复

使用道具 举报

 楼主| 发表于 2022-8-4 23:11:56 | 显示全部楼层
asd404298934 发表于 2022-8-4 14:40
You can check whether there is a plane one second after the Dodge time. You can check whether there  ...

Thanks! Will check it out.
Also, what kind of setting of the plane should I double-check with?
回复

使用道具 举报

发表于 前天 11:08 | 显示全部楼层
libbyhk 发表于 2022-8-4 23:11
Thanks! Will check it out.
Also, what kind of setting of the plane should I double-check with?

If it is an aircraft parked on the ground, please check whether its apron can be pushback. If the apron pushback setting is normal or it is an aircraft in the sky, please check whether the correct PVM file is called in spec.ini in the aircraft painting file
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

Archiver|手机版|小黑屋|Flybedream@ATC管制室

GMT+8, 2022-8-18 16:43 , Processed in 0.075764 second(s), 15 queries .

Powered by Discuz! X3.4

Copyright © 2001-2022, Tencent Cloud.

快速回复 返回顶部 返回列表